Low water pressure was the symptom of an aging, decaying shower diverter/ valve. Upon exploring core replacement for this particular valve, it was apparent that the valve body and stem core had seized together with mineral deposits. This is common as water carries minerals that bond to the metals in...
These rings were made by using 12 individual segments of Redwood 2x6. They were mitered with 15 degree cuts on each side so as to make for (12) 30 degree joints which add up to 360 degrees, or a full circle. Then they were rabbited, glued and nailed together with...
A his and hers shower with lots of details and some supports for peace of mind in the future.
Some of our past projects to inspire you as summer draws near!
Here is a 4" spread faucet with a 7" spread sink. These are important details in the materials selection and ordering process. You cannot make this faucet fit, check your notes. Simple things like this can cause delays in finalizing your project. It's always best to ask questions, check the...
